11.20.05:18
[PR]
06.01.18:53
■ iTP H01 HEADLAMP 1AAA Cree XP-E Q5bin Max 80Lumens
■ iTP H01 HEADLAMP 1AAA Cree XP-E Q5bin Max 80Lumens
iTP H01 HEADLAMP のご紹介です。
ITP H01 Headlampは、単四アルカリ乾電池 x1本で、発光体にCree XP-E LED Q5bin、リフはTextured Reflectorを搭載、コンパクトなアルミボディーの小型LEDヘッドランプです。
調光は、3モード(Low→Mid→High)です。
Headのツイスト操作で調光出来ます。
配光は、同社のコンパクトLEDフラッシュライトのA3 EOS系のビームパターンでムラの少ない照射を実現しています。
ヘッドバンドから外して付属のクリップを付ければ、ミニL型フラッシュライトとしてもご使用頂けます。
* LED Type: Cree XP-E Q5
* Function: Low-Med-High
* Finish: HA Type Ⅲ
* Reflector: Orange Reflector
* Lens:Anti-shattering ultra clear lens, anti-scratching and anti-slip
* Water and Dust Resistant to IP68
* Switch: Head Twisty Switch
* Mil-spec: MIL-STD-810F
* Battery: 1 x AAA
* Functions and Runtime
Three output levels: Low 1.5 lumens (50 hours) -> Medium 18 lumens (4 hours) ->-High 80 lumens (55 minutes)
* Standard Accessories: 1 x Clip, 2 x O-rings, 1 x Manual
* Size and Weight:
L 52.5mm (2.07'') x D 16.2mm (0.64'') x W 36.2mm (1.43'') ,
22.8g (Excluding Battery and belt), 50.8g (Excluding battery)
Operation:
Battery installation:
Remove the light tail.
Insert the battery with the negative end toward the tail.
Operation:
Insert the battery and tighten the tail
Tighten the head clockwise to turn on the headlamp.
When the light is on, loosen (counter-clockwise) and tighten (clockwise) the head within 1 second will change the mode from low, medium to high level.
When choose a specific mode, the headlamp with memorize it and next time the headlamp will enter into that specific mode when turning on.
Loosen the head to turn off the headlamp.
Warning:
If you don't need to use the headlamp for quite a long time, it is suggested to loosen the tail as well, which will avoid the unexpected turning on.
日本語取扱説明書、規約に基づく1年保証付
販売価格¥3,045 (税込)
iTP H01 HEADLAMP のご紹介です。
ITP H01 Headlampは、単四アルカリ乾電池 x1本で、発光体にCree XP-E LED Q5bin、リフはTextured Reflectorを搭載、コンパクトなアルミボディーの小型LEDヘッドランプです。
調光は、3モード(Low→Mid→High)です。
Headのツイスト操作で調光出来ます。
配光は、同社のコンパクトLEDフラッシュライトのA3 EOS系のビームパターンでムラの少ない照射を実現しています。
ヘッドバンドから外して付属のクリップを付ければ、ミニL型フラッシュライトとしてもご使用頂けます。
* LED Type: Cree XP-E Q5
* Function: Low-Med-High
* Finish: HA Type Ⅲ
* Reflector: Orange Reflector
* Lens:Anti-shattering ultra clear lens, anti-scratching and anti-slip
* Water and Dust Resistant to IP68
* Switch: Head Twisty Switch
* Mil-spec: MIL-STD-810F
* Battery: 1 x AAA
* Functions and Runtime
Three output levels: Low 1.5 lumens (50 hours) -> Medium 18 lumens (4 hours) ->-High 80 lumens (55 minutes)
* Standard Accessories: 1 x Clip, 2 x O-rings, 1 x Manual
* Size and Weight:
L 52.5mm (2.07'') x D 16.2mm (0.64'') x W 36.2mm (1.43'') ,
22.8g (Excluding Battery and belt), 50.8g (Excluding battery)
Operation:
Battery installation:
Remove the light tail.
Insert the battery with the negative end toward the tail.
Operation:
Insert the battery and tighten the tail
Tighten the head clockwise to turn on the headlamp.
When the light is on, loosen (counter-clockwise) and tighten (clockwise) the head within 1 second will change the mode from low, medium to high level.
When choose a specific mode, the headlamp with memorize it and next time the headlamp will enter into that specific mode when turning on.
Loosen the head to turn off the headlamp.
Warning:
If you don't need to use the headlamp for quite a long time, it is suggested to loosen the tail as well, which will avoid the unexpected turning on.
日本語取扱説明書、規約に基づく1年保証付
販売価格¥3,045 (税込)
PR
- トラックバックURLはこちら